Product Categories

Contact us

Bo Yisheng Electronic Technology Co., Ltd.

Contact: Chen Sheng

Tel: 18755511218

QQ number: 646989309

E-mail: eden@boyish.cn

Fax: 0769-81779026

Address: Building A, No. 17, Jinfu Road, Huanan Industrial Park, Tangbian Community, Liaobu Town, Dongguan, Guangdong, China

Water-based environmental clea

Your current location: Home > Product > Water-based environmental clea >

Solder paste cleaning solution T1006W TDS

  • Category:Water-based environmental clea

  • Hit count:
  • Release date:2019-08-08
  • 在线询价
  • Detailed introduction

Part I Chemical products and company identification

chemical product
Product Name: TENICK T1006W
Recommended use: Used to clean all kinds of solder paste on SMT steel mesh.
Company logo
Supplier (Company Name / Address / Phone)
Company website
supplier address:50 Raffles Place,#34-04 Singapore Land Tower Singapore 048623
Supplier phone:(65)65326932 

Part II Hazard Overview

Classification: This product is not dangerous.
Hazard label
Health hazards: Excessive contact can cause eye, skin or respiratory irritation.
Environmental hazards: No obvious hazards.
Explosion hazard: Non-flammable liquid, no explosion hazard.
Part III Product Introduction
TENICK 1006W is suitable for the thorough cleaning of various solder pastes on SMT steel mesh.
It is an environmentally friendly low foaming water based ultrasonic, spray cleaning type, non-flammable and non-explosive, mild odor-based water-based cleaning agent. 
Part IV Product Performance
Technical indicators
Exterior Light yellow transparent liquid
Boiling point (°C) ≥100℃
Relative specific gravity (20 ° C) 1.05±0.05
Water soluble Soluble
pH (10% DI water dilution) 10.5±0.5
Part 5 Product Features
1. Low foaming water-based environment-friendly type, non-flammable and explosive, with mild odor.
2. Strong cleaning ability, strong removal of various steel mesh solder paste and organic matter.
3. Contains corrosion inhibition factor to prevent corrosion of the device.
4. It is easy to rinse without residue, and the device is bright as new after cleaning.
5. Long cleaning life, multiple use, safe and effective.
Part VI Usage and precautions
1. Stock solution: water (deionized water) = 1:3 diluted and used.
2. The cleaning temperature range is 50 ± 5 °C. Cleaning time is 3 to 5 minutes.
3. Can not be mixed with any other cleaning solution.
4. Please refer to the MSDS data of this product for safe use instructions.
Part VII Storage matters
1. Warranty period: 1 year (sealed)
2, stored in a good place at room temperature, cool, dry, ventilated, avoid high temperature direct, the temperature is between 30% - 90%;